Roberts Radio CRD-42 - Manual (Page 20)

iPod docking
Your clock radio has an iPod dock facility which allows you to play digital
audio files and video soundtracks held on your iPod using the clock radio's
loudspeakers.
Your radio uses the iPod Universal Dock connector developed for use with
iPods. Recent models of iPod are supplied with Universal Dock Adapter
inserts which ensure correct alignment of the iPod with the electrical
connector. Should you require a Universal Dock Adapter to use your iPod
with your clock radio, then please contact an iPod accessories supplier.
Important: To avoid possible damage to your iPod, do not use your iPod
with the product without the correct adapter fitted to the radio.
Docking your iPod
1. Place the iPod Universal Dock Adapter into the iPod docking recess
so that it is securely seated.
2. Carefully place your iPod onto the Universal Dock connector.
3. Press the On / Standby button to switch on your clock radio.
4. To select the iPod mode press the Mode button until "IPOD" shows
on the display. If it was previously playing, your iPod will switch on
and continue playing from where it was previously stopped.
Note: Your clock radio is able to recharge your iPod's internal battery. Your
iPod will use its backlight settings as configured. If these need changing,
use the Settings menu on your iPod.
Docking recess Dock connector for iPod
3
4
19