Roberts Radio CRD-42 - Manual (Page 25)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
24
Cancelling alarms
1. While an alarm is sounding it can be cancelled by pressing the
On / Standby button.
1
To view the alarm settings
1. Press the On / Standby button to switch on the clock radio. If neces-
sary press and release the Mode button to put the radio into DAB or
FM mode.
2. Press the Alarm button to enter the alarm setup.
3. Press the Select button, then press the Tuning Up or Down buttons
to view alarms 1 or 2.
4. Press the Select button to cycle through each of the settings for the
chosen alarm.
You may use the Tuning Up and Down buttons to modify any particular
setting if desired, using the Select button to enter the modification.
3,4
3,4
3,4
2