Roberts Radio CRD-42 - Manual (Page 33)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
32
System reset
If your radio fails to operate correctly, or some digits on the display are
missing or incomplete carry out the following procedure.
1. Press the On / Standby button to switch on the clock radio. If necessary
press and release the Mode button to put the radio into DAB or FM
mode.
2. Press and release the Menu button.
3. Press and release the
Tuning Up or Down button until "FACTORY"
appears on the display. Press and release the Select button so that the
display shows "RESET" and then press the Select button again.
4. A full reset will be performed. The station list and presets will be erased.
Alarms will be cancelled and snooze and sleep timer settings will be
set to their default values. The display will show "ROBERTS" and after
a few seconds a station scan search will be performed automatically.
The display will show progress of the station search, for example
">>>> 18". The number on the right of the display is the number of
stations that have been found.
In case of malfunction due to electrostatic discharge, reset the product
as above to resume normal operation. If you are not able to perform the
reset operation as above, removal and reconnection of the power supply
may be required.
If a problem persists our technical staff would be pleased to offer any
assistance on operating the radio. Our technical helpline number is
020 8758 0338.
2
3
3
3