Roberts Radio CRD-42 - Manual (Page 19)

If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
18
Recalling a preset station
1. Press the On / Standby button to switch on the radio.
2. Press the Mode button to select the desired waveband.
3. Press and release the Preset button. The display will show, for
example, "Empty 1" if no station has been stored to that preset. If a
preset has been stored, then the display will show either the station
name (for DAB stations) or the frequency (for FM stations).
4. Press the Tuning Up or Down buttons to select the desired preset
station.
5. Press the Select button. Your clock radio will tune to the chosen
preset station stored in the preset memory.
2
3
4
4
5