Roberts Radio CRD-42 - Manual (Page 24)

23
16. Press the Select button to enter the alarm month setting. The alarm
day will flash on the display.
17. Press the Tuning Up or Down buttons to choose the alarm day.
18. Press the Select button to enter the setting. The alarm source option
will flash on the display.
19. Repeatedly press the Tuning Up or Down buttons to choose the
desired alarm source (DAB, FM, BUZ, iPod).
20. Press the Select button to confirm the alarm settings and return to
normal radio mode.
Radio and iPod alarms are indicated in the display by the symbol and
the corresponding alarm number. Buzzer alarms are indicated by the
symbol and the corresponding alarm number.
When your clock radio is set to wake by the radio alarm, your clock radio
will switch to the last used DAB or FM radio station.
Important: If using your iPod as the source for the alarm, then be sure to
dock your iPod. After docking, briefly switch on the clock radio using the
On / Standby button and then select iPod mode using the Mode button.
Next, press the Play / Pause button two or three times to ensure that the
clock radio and your iPod are communicating correctly. Failure to verify
this may result in the alarm not being audible if the clock radio is unable
to activate your iPod when needed. When ready, put the clock radio back
into standby mode using the On / Standby button.
16,18
20
17,19
17,19