Roberts Radio CRD-42 User Manual

Page 22

Advertising
background image

Setting alarm times

Your clock radio has two alarms which can be set to wake you to DAB,

FM radio, iPod item or beep type alarm. Each alarm can be set to sound

once, daily, on weekdays or at weekends.

The alarms can only be set

when your clock radio is switched on and in DAB or FM mode.

Note: If no buttons are pressed for 7 seconds, your clock radio will exit

the alarm setup.

1. Press the On / Standby button to switch on the clock radio. If necessary

press and release the Mode button to put the radio into DAB or FM

mode.

2. Press and release the Alarm button. The display will show

"SET ALM".

3. Press the Select button to enter the alarm setup. "Alarm 1"

flashes.

4. Press the Tuning Up or Down buttons to select the desired alarm

number, 1 or 2.

5. Press the Select button to enter the setting for the chosen alarm.

Press the Tuning Up or Down buttons to select ON or OFF. If OFF

is selected any current setting for that alarm will be cancelled.

6. Press the Select button to cause the alarm hour digits to flash on the

display.

7. Press the Tuning Up or Down buttons to choose the desired alarm

hour.

2

1

4,5,7

4,5,7

3,5,6

21

Advertising