Roland VS-880EX - Manual (Page 160)

DIRECT OUT
The sounds from each of the Tracks 1–4 or Tracks 5–8
are output from separate analog jacks.
1. Hold down [SHIFT] and press [EDIT (FADER)].
2. Press PARAMETER [ ] [ ] to let “DIR
OUT=” appears in the display.
3. Determine what is to be output from the DIRECT
OUT by rotating the TIME/VALUE dial.
DIR OUT (Direct Out)
The metronome sound is not output.
Off: The DIRECT OUT is not use.
1–4: The sounds from Tracks 1–4 are output from
the following jacks. In this case, the settings for
the MASTER and AUX jacks are not in effect.
The sounds from Tracks 1 and 2 are output
from the PHONES jack. Additionally, the
sounds output from the DIGITAL OUT connec-
tors are specified in the Master Block (p. 159).
Track 1: MASTER jack (L)
Track 2: MASTER jack (R)
Track 3: AUX A jack (L)
Track 4: AUX A jack (R)
5–8: The sounds from Tracks 5–8 are output from
the following jacks. In this case, the settings for
the MASTER and AUX jacks are not in effect.
The sounds from Tracks 5 and 6 are output
from the PHONES jack. Additionally, the
sounds output from the DIGITAL OUT connec-
tors are specified in the Master Block (p. 159).
Track 5: MASTER jack (L)
Track 6: MASTER jack (R)
Track 7: AUX A jack (L)
Track 8: AUX A jack (R)
4. Press [PLAY (DISPLAY)].
Return to Play condition.
Confirming That a Drive is
Not Damaged (Drive Check)
You can check the drive you are using to make sure it
can be read correctly. This is referred to as
Drive
Check .
This provides a way to determine whether a failure
during Song Copy (p. 102) or DAT Backup (p. 129) is
due to a problem in the song itself that was saved on
disk, whether the problem is with the connections, or
if there is a problem of some other kind.
If data cannot be read correctly, the display will indi-
cate the song in which the error occurred.
1. Press [SYSTEM] several times until “SYS Drive
Check ?” appears in the display.
2. Press [YES].
3. Select the drive that you wish to check. Rotate the
TIME/VALUE dial.
CheckDrive (Check drive)
Select the disk drive that you wish to check.
4. When you have selected the drive you wish to
check, press [YES].
5. A confirmation message ask you that you want to
proceed with the Drive Check appears in the dis-
play. Press [YES].
6. “STORE Current?” appears in the display. If you
wish to save the current song, press [YES]; if not,
then press [NO].
If you have selected a demo
song, then press [NO] .
7. Drive Check is the executed. Progress of the oper-
ation is shown in the display. Do not turn off the
power until the operation is completed.
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
Chapter 12 Other Convenient Functions
160