Roland VS-880EX - Manual (Page 93)

1. You can exchange the tracks that are currently
audible. Select the V-track containing the source
playback data to be exchanged.
2. Press [TRACK] several times until “TRK Track
Exchange ?” appears in the display.
3. Press [YES].
4. Press CURSOR [ ] several times until “TRK
Tr.=?-*:?=>?-?:?” (“*” is the current V-track bank)
appears in the display.
5. Press [SELECT (CH EDIT)] for the channel con-
taining the exchange source track.
The SELECT indicator will light orange.
You can also use the TIME/VALUE dial to select the
exchange source track.
6. Press [STATUS] for the exchange destination
track.
The STATUS indicator will light red.
7. Rotating the TIME/VALUE dial allows you to
specify the exchange destination V-track. For
example, “1-A:1” indicates “V-track 1 of track 1 in
V-track bank A.”
8. If you want to exchange multiple tracks simulta-
neously, repeat Steps 5–7.
* Do not designate V-tracks that have already been specified
as exchange destinations for other Tracks.
9. If there are any tracks which you decide not to
exchange, press that track's [SELECT (CH EDIT)]
once again.
The SELECT indicator will blink orange.
Alternatively, you can use PARAMETER [ ]
[ ] to access the settings for that track, and press
[CANCEL (NO)] twice.
10. Press PARAMETER [ ].
“TRK TrackExchangeOK ?” appears in the display.
11. Press [YES].
This executes Track Exchange. If you wish to cancel,
press [NO].
12. When the exchange is completed correctly,
“Complete” appears in the display, and return to
Play condition.
Inserting a Blank Space Into
Performance Data (Track Insert)
This operation inserts blank space at the specified
location.
* Do not leave sound within 0.5 seconds before or after the
area into which the data will be inserted. Any sound
which was within 0.5 seconds of the inserted data will not
playback.
1. Press [TRACK] several times until “TRK Track
Insert ?” appears in the display.
2. Press [YES].
3. Press CURSOR [ ] several times until “TRK
Insert Tr.=?-?” appears in the display.
4. Press [STATUS] for the channel containing the
insert source track.
The STATUS indicator will light red.
Track Exchange with a different V-track
bank
You can use Track Exchange to swap tracks or V-
tracks of different V-track banks. For example if
you wish to copy track 1 / V-track 1 of V-track
bank A (hereafter referred to as A-1-1) to track 1 /
V-track 1 of V-track bank B (referred to as B-1-1),
you can use the following procedure.
1. Track exchange A-1-1 and B-1-8.
2. Copy B-1-8 to B-1-1.
3. Once again, track exchange B-1-8 and A-1-1.
CONDITION MARKER#
MASTER INPUT TRACK AUX
TIME
48
24
4
0
dB
12
Exchange
source track Exchange
destination track
blinking
Time To
blank
Length
Chapter 6 Editing a Recorded Performance (Track Editing)
93
Chapter 6