Deleting a stored time location, Using markers, Marking a time location – Roland VS-880EX User Manual

Page 38: Moving the location of markers, Chapter 2 basic operation 38

Advertising
background image

Deleting a Stored Time Location

1. While holding down [CLEAR], press the LOC

button ([1/5]–[4/8]) for locate point that you wish
to delete. For example, if you wish to delete the
LOCATOR 1’s located point, then press [CLEAR]
and [1/5] simultaneously. If you wish to delete
the time that was registered in Locator 5, hold
down [SHIFT] and press [CLEAR] and [1/5].

Using Markers

Along with the playback locate points, you can set up
to 1000 Markers in sequence. The Markers are also a
useful and convenient way to define sections of a song
to be repeated in Loop Recording or for marking
points in Punch-In Recording.

* An interval of at least 0.1 seconds must left between

markers. It will not be possible to add a new markers if a
markers already exists at a location less than 0.1 seconds
away.

Marking a Time Location

Press [TAP], and a marker will be added to the current
location. This can be done during recording or play-
back of the song as well as when the song is stopped.

Moving the Location of Markers

To move to the Marker immediately preceding the
current playback time, press [PREVIOUS]. You move
ahead one marker at a time in the order they are
placed each time the button is pressed. To move to the
Marker immediately following the current playback
time, press [NEXT].

0

1

2

3

4

5

6

TAP

TAP

TAP

TAP

TAP

TAP

TAP

00h00m00s00

Time

0

1

2

Time

PREVIOUS

NEXT

Displaying Markers
The Marker number at any playback location is
indicated in the display. If there is no Marker
number in the current location, then the closest
preceding Marker number is displayed. If there
are no markers in the song, “—” is indicated. If
“***” is shown in the display, it indicates that
although there are markers placed in the song, the
current location is before the first marker.

Chapter 2 Basic Operation

38

About Marker Numbers
Each marker is assigned a number 000-999, in the
order of its time location. This means that if you
add a new marker at a location earlier than an
existing marker, the numbers of the subsequent
markers will be incremented.

0

1

2

3

TAP

Time

Before setting a Marker

0

1

3

4

2

Time

After setting a Marker

Advertising