Ricoh Type W3600 - Manual (Page 147)

Scan Settings When Using as a Twain Scanner
139
6
Scan Settings When Using as a Twain Scanner
This section explains how to specify original orientation when you are using the
machine as a TWAIN scanner.
Setting Original Orientation When Using as a TWAIN Scanner
To correctly display the top/bottom orientation of scanned originals on a client
computer, the placement of originals and the settings made in the Scanner Con-
trol dialog box must match.
A
Open the Scanner Control dialog box.
For details about how to open the Scanner Control dialog box, see "Basic Net-
work TWAIN Scanner Operation".
B
Make settings in the [Original Size] area.
The following table shows the relationship between the original orientation
and the Scanner Properties dialog box settings:
Original orientation TWAIN Scanner Properties dialog box key
Top edge of original is placed first
Align the original, turn it rightward or left-
ward, and then place it face down.
OFF
Top edge of original is on the right
Align the original so that its top edge is on
your left, turn it rightward or leftward, and
then place it face down.
Left 90 deg.
Top edge of original is on the left
Align the original so that its top edge is on
your right, turn it rightward or leftward, and
then place it face down.
Right 90 deg.
Bottom edge of original is placed first
Align the original, turn it rightward or left-
ward, and then place it face down.
180 deg.
ATF014S
ATF015S
ATF016S
ATF017S