Ricoh Type W3600 - Manual (Page 15)

7
Preview
Use the Preview screen to check that originals have been scanned correctly.
This section explains about the Preview screen that can be used before sending
files by e-mail or Scan to Folder, or delivering files.
Before you start scanning, press [Preview]. If you scan originals while [Preview] is
selected, the Preview screen appears. You can start or cancel sending the files af-
ter checking the preview and the scan settings used for scanning.
❖ Preview
1.
[Zoom Out] and [Zoom In]
Press to reduce or enlarge the displayed
preview.
2. [
←][→][↑][↓]
Press to shift the displayed area.
3. [Cancel Sending]
Press to close a preview and interrupt a
transmission.
4. [Send]
Press to close a preview and continue a
transmission.
5.
Display File
Displays a file's name and size.
6. Display Page
Displays the number of the currently dis-
played page, total number of pages, page
size, and color mode.
7.
[Switch]
Press to change the page of the selected
file that is displayed.
8. Display Position
Displays the position of an image when
enlarged.
Note
❒ The preview function is not available when scanning originals that are larger
than 18 × 24 inch or A2.
❒ Preview is not available if a file is scanned using [Store Only].
❒ You can view a stored file using the Preview screen displayed from the list of
stored files. For details about viewing a stored file, see "Checking a Stored File
Selected from the List".
❒ Preview might not be displayed if scanning failed or the image file is corrupt-
ed. If this is the case, scan the original again.
Reference
p.73 “Checking a Stored File Selected from the List”
ATG017S