Ricoh Type W3600 - Manual (Page 70)

Sending Scan Files to Folders
62
2
Simultaneous Storage and Sending by
Scan to Folder
This section explains how to store a file and simultaneously send it by Scan to
Folder.
A
Press [Store File].
B
Make sure that [Send & Store] is selected.
C
If necessary, specify file data, such as [User Name], [File Name], and [Password].
For details, see "Specifying File Information for a Stored File".
D
Press [OK].
E
Specify the setting for sending the file by Scan to Folder, and then send the
file.
For details about sending a file by Scan to Folder, see "Basic Operations When
Using Scan to Folder".
Note
❒ Depending on the security setting, [Access Privileges] may appear instead
of [User Name]. For details about specifying [Access Privileges], consult the
administrator.
❒ You can resend stored files by Scan to Folder. To resend stored files, select
the files on the Select Stored File screen, and then send them. For details,
see "Sending a Stored File".
Reference
p.67 “Specifying File Information for a Stored File”
p.45 “Basic Operations When Using Scan to Folder”
p.76 “Sending a Stored File”