Roland ATELIER AT-500 - Manual (Page 101)

99
Using the Registration Buttons
Using the Registration Buttons
Settings for Rhythm play and Automatic Accompaniment are recalled when
you continue holding a Registration button [1]–[8] for several seconds, but you
can change this so that the settings are recalled the instant you press the
button.
1.
Touch <Registration> on the Main screen.
The Registration Load screen appears.
fig.03-05.eps
2.
Touch < > (Utility).
The Utility screen appears.
fig.03-06.eps
3.
Touch <Options>.
The Registration Options screen appears.
fig.03-07.eps
Changing the Timing of Recalling Registrations
You can also open the
Registration Load screen by
pressing the [Registration]
button on the panel.
You can also use the following
method to open the Registration
Options screen.
1. Touch <Quick Guide> on the
Main screen, to display the
Quick Guide screen.
2. Press the Registration
[Write] button.
The Registration Options
screen appears.
AT-500_e.book 99 ページ ２００８年７月２８日 月曜日 午後４時１７分