Roland ATELIER AT-500 - Manual (Page 224)

222
Various Other Settings
1. Touch <System> on the Main screen.
The System screen appears.
2. In the System screen, touch <Utility>.
fig.00-38.eps
3. Touch <BMP Installer>.
fig.09-32.eps
The BMP Installer screen appears.
fig.09-34.eps
4. In the screen, touch <01>–<03> to select the
image that you wish to delete.
You can touch <View> to verify the image.
Numbers for which “(Blank)” is shown have no image.
5. Touch <Clear...>.
The following screen appears.
fig.09-39.eps
To cancel without deleting the image, touch <Cancel>.
6. Touch <OK>.
The image will be deleted.
Once the image has been deleted, the screen will indicate
“(Blank.)”
Deleting an Image Stored in Internal
Memory
AT-500_e.book 222 ページ ２００８年７月２８日 月曜日 午後４時１７分