Roland ATELIER AT-500 - Manual (Page 213)

211
Various Other Settings
Various Other Settings
You can adjust the mic echo that will apply to a connected
microphone.
Connecting the Microphone (p. 23)
1. Touch <System> on the Main screen.
The System screen appears.
2. Touch < > < > to display the Mic Echo.
fig.09-24.eps
3. Touch the Mic Echo setting.
fig.09-26.eps
4. Touch < > < > to change the setting.
5. Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
Transmission of PC (Program Change) numbers can be
switched ON/OFF when a Registration is selected.
1. Touch <System> on the Main screen.
The System screen appears.
2. Touch < > < > to display the Send PC
Switch.
fig.00-37.eps
3. Touch the Send PC Switch setting to switch
between “ON” and “OFF.”
Each time you touch the Send PC Switch setting, it will
alternate between “ON” and “OFF.”
4. Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
Adjusting the Mic Echo
Setting
0–12
Enabling Transmission of PC Numbers
Setting Description
ON PC numbers are transmitted
OFF PC numbers are not transmitted
AT-500_e.book 211 ページ ２００８年７月２８日 月曜日 午後４時１７分