Roland ATELIER AT-500 - Manual (Page 30)

28
Before You Start Playing
You can play back audio CDs and CD-ROMs containing
saved SMF music files.
You can also play songs on VIMA CD-ROMs (VIMA TUNES)
sold by Roland.
Precautions Concerning Use of the CD
• The ATELIER is capable of playing back only commercial
CDs that conform the official standards-those that carry
the “COMPACT DISC DIGITAL AUDIO” logo.
• The usability and sound quality of audio discs that
incorporate copyright protection technology and other
non-standard CDs cannot be guaranteed.
• For more detailed information on audio discs featuring
copyright protection technology and other non-standard
CDs, please consult the disc vendor.
• You cannot save songs to CDs, and you cannot delete
songs recorded to CDs. Furthermore, you cannot format
CDs.
CD drives that draw their power from the USB connector
cannot be used.
1. Switch off the power to the ATELIER and the CD
drive to be connected.
2. Connect the USB cable included with the CD
drive to the Ext Drive connector on the
ATELIER.
3. Turn on the power to the ATELIER.
4. Turn on the power to the connected CD drive.
For information on how to perform the following CD-drive
operations, refer to the owner’s manual for the drive.
• Switching the power on and off
• Inserting and ejecting a CD
A list of the CD drives that have been tested and found to be
compatible is available on the Roland website.
http://www.roland.com/
Using a CD Connecting a CD Drive
NOTE
Ext Drive
Connector
USB Cable
NOTE
AT-500_e.book 28 ページ ２００８年７月２８日 月曜日 午後４時１７分