Roland ATELIER AT-500 - Manual (Page 169)

167
Recording/Playing Back What You Play
Recording/Playing Back What You Play
If you wish to discard your recording and re-record from the
beginning, or if you wish to record a new performance, you
must erase the previously-recorded data.
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.07-04-2.eps
2. Touch < > (Utility).
The Utility screen appears.
fig.07-22-2.eps
3. Touch <Song Clear>.
The following message, asking you to confirm your
choice, will be displayed.
fig.E-62.eps
If you touch <Cancel>, the performance data will not be
erased, and you will return to the Rec/Play screen.
4. If you touch <OK>, the performance data will
be erased.
A name is automatically assigned to a performance song that
you record. However, at some point you may wish to change
the name to something more meaningful.
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.07-04-2.eps
2. Touch < > (Utility).
The Utility screen appears.
fig.07-22-2.eps
Erasing a Performance Song
(Song Clear)
Changing the Name of a
Performance Song (Rename)
You can also use the following method to open the
Song Clear screen.
1. Touch <Quick Guide> on the Main screen to
display the Quick Guide screen.
2. Press the [Song] button.
The Song Clear screen appears.
AT-500_e.book 167 ページ ２００８年７月２８日 月曜日 午後４時１７分