Roland ATELIER AT-500 - Manual (Page 201)

199
Various Other Settings
Various Other Settings
You can specify which keyboard will be affected when you
press the Damper (Sustain) pedal.
1. Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2. Touch <Controller>.
The Controller screen appears.
3. Touch < > < > to display the Damper
Pedal.
fig.09-08.eps
4. Touch the Damper Pedal setting to switch
between “to UPPER” and “to LOWER.”
Each time you touch the Damper Pedal setting, it will
alternate between “to UPPER” and “to LOWER.”
5. Touch <Exit>.
Specify how the Expression Pedal will function when your
performance is being recorded and when ATELIER song files
are being played back.
Function During Recording
Specify whether Expression Pedal operations will be recorded
or not while your performance is being recorded.
1. Touch <Sound/KBD> on the Main screen.
The Sound/Keyboard screen appears.
2. Touch <Controller>.
The Controller screen appears.
3. Touch < > < > to display the Exp. Src
(Rec).
fig.09-10.eps
4. Touch the Exp. Src (Rec) setting to switch
between “PEDAL” and “COMPOSER.”
Each time you touch the Exp. Src (Rec) setting, it will
alternate between “PEDAL” and “COMPOSER.”
5. Touch <Exit>.
Performance Function Settings
Selecting the Keyboard Affected by the
Damper Pedal
Setting Description
to UPPER
The effect is applied to the voices played on the
Upper keyboard.
to LOWER
The effect is applied to the voices played on the
Lower keyboard.
Changing the Function of the
Expression Pedal
Setting Description
PEDAL
Expression Pedal movements will be
recorded. The previous recording will be
erased as new songs are recorded.
COMPOSER
Expression Pedal movements will not be
recorded. The previous data will remain
without being erased.
AT-500_e.book 199 ページ ２００８年７月２８日 月曜日 午後４時１７分