Roland ATELIER AT-500 - Manual (Page 178)

176
Recording/Playing Back What You Play
This setting (ON/OFF) determines whether or not a
metronome count-in (2 measures) will be heard after pressing
the [Play/Stop] button on recording.
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.07-04.eps
2. Touch < > (Utility).
The Utility screen appears.
fig.07-22.eps
3. Touch <Options>.
fig.03-37.eps
4. Touch < > < > to display the Count-In
Rec.
5. Touch the Count-In Rec setting (ON/OFF) to
switch it between “ON/OFF.”
Each time you touch the Count-In Rec setting, it will
alternate between ON/OFF.
6. Touch <Exit>.
Starting Recording at the Right
Moment (Count-In Recording)
Setting Description
ON A two-measure count will sound before recording
OFF No count will sound before recording
AT-500_e.book 176 ページ ２００８年７月２８日 月曜日 午後４時１７分