Roland ATELIER AT-500 - Manual (Page 186)

184
Editing Your Musical Performance Data
This function lets you copy a portion of recorded song to a
different measure (bar) location in the same track.
If a recording already exists at the copy destination, it will be
erased.
Example: To copy measures (bars) 5–7 to measure (bar) 8
fig.08-13.eps
1. Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
fig.08-02.eps
2. In the Rec/Play screen, touch < > (Utility) to
open the Utility screen.
fig.08-03.eps
3. In the Utility screen, touch <Edit>.
The Edit Menu screen appears.
fig.08-08-a.eps
4. Touch <Copy>.
fig.08-14-2.eps
The Copy screen appears.
fig.08-14.eps
5. Touch the “Track” value (the track to be
copied).
6. Touch < > < > to set “Track” (the track to
be copied).
fig.08-15-2.eps
If you select “ALL,” the recording in all the tracks will be
copied.
7. When you’re done making the settings, touch
<Exit>.
8. Touch the “From” value (the measure at which
copying will begin).
Copying Measures (Copy)
1 2 3 4 5 6 7
1 2 3 4 5 6 7 8 9 10
Track
ALL, RHYTHM, ACCOMP, BASS, LOWER, UPPER, SOLO,
CONTROL
AT-500_e.book 184 ページ ２００８年７月２８日 月曜日 午後４時１７分