RuggedCom RuggedRouter RX1100 - Manual (Page 136)

14. Configuring The Firewall
Revision 1.14.3 136 RX1000/RX1100™
This menu allows you to control which addresses the firewall will accept connections from after it has
been stopped. Add a new translations by selecting the “Add a new stopped address” link or by clicking
on the add-above or add-below images in the Add field. Reorder the translations by clicking on the
arrows under the Move field.
Clicking on a link under the Interface field will allow you to edit or delete the rule, as shown below.
You may also make changes by manually editing the rule file.