RuggedCom RuggedRouter RX1100 - Manual (Page 228)

24. Configuring Serial Protocols
Revision 1.14.3 228 RX1000/RX1100™
24.2.8. Serial Protocols Trace Menu
Figure 24.10. Serial Protocols Trace Menu
This menu displays decoded serial port and network activity.
The desired traffic sources, number of messages and length of time to capture are entered and the
Start Trace button is pressed. The menu will display up to the provided number of messages waiting
up to the specified number of seconds.
The Trace on ports: selections feature a list of serial ports with unused entries greyed out. The default
is All Ports, which selects all ports.
The Message RX/TX field allows log entries to be printed for each received or transmitted message,
and method of packetization. If the Hex Dump field is selected, the first 64 bytes of packet content
is displayed.
The Incoming/Outgoing Connections field allows regular network level entries such as call
connections and received/transmitted messages to be displayed. Note that some unexpected, but
unusual, network messages may be displayed if they occur.
Note
Specifying large numbers of ports, entries and capture times can result in a great deal of
output. Specifying a large capture time may require the web page to wait that interval if activity
is infrequent.
24.2.9. Serial Protocols Sertrace Utility
>
The command line sertrace utility offers the ability to trace the activity of serial ports in real time. A
port range may be specified to limit the output to specific ports. The level of traffic to trace and the