RuggedCom RuggedRouter RX1100 - Manual (Page 259)

29. Configuring NTP
Revision 1.14.3 259 RX1000/RX1100™
The Version field indicates the version of the NTP protocol used to communicate with this host.
Change this only if it is known that the host requires a version other than 4.
The Key field provides an authentication key associated with this host.
The Preferred field determines whether this host is preferred over other hosts in the list.
The Check field link leads to a page that displays the result of an NTP query to this host. Use this
feature to determine if the configured host is active.
29.2.4. Peers Configuration
This menu allows you to enter and edit peers. Peers are NTP servers of the same stratum as the
router, and are useful when contact is lost with the hosts in the NTP servers menu.
The per-peer configuration information is as described in the previous menu.
29.2.5. Viewing NTP Status
Figure 29.4. NTP Status
The NTP Status menu displays possible sources and currently used reference clocks