RuggedCom RuggedRouter RX1100 - Manual (Page 66)

6. Configuring Ethernet Interfaces
Revision 1.14.3 66 RX1000/RX1100™
The MTU field defines the MTU size to request when connecting to the PPPoE server. In some cases
the PPPoE provider may provide a smaller MTU in which case the smaller setting will be used, or it
may refuse to alter the MTU and use whatever it considers to be the default.
The Save button will update all of the changes. The current PPPoE link will be connected.
The Delete button will delete the PPPoE interface, closing the current PPPoE link.
6.2.7. PPP Logs
Figure 6.9. Display PPP Logs
This menu displays the native Ethernet and internal ADSL interface PPPoE connection messages.
This is mainly useful when trying to debug a PPP connection problem.
6.2.8. Current Routes & Interface Table
The table provided by this command is as described in the Networking menu, Network Utilities sub-
menu. It is also provided here as a convenience.