RuggedCom RuggedRouter RX1100 - Manual (Page 171)

17. Configuring Dynamic Routing
Revision 1.14.3 171 RX1000/RX1100™
17.2.3.3. BGP Network Neighbor Configuration
Figure 17.10. BGP Network Neighbor Configuration Menu
Neighbor IP is the IP address of a BGP neighbor to add. A BGP Neighbor is
Remote AS is Autonomous System ID of a BGP neighbor.
The Metric attribute is propagated throughout an AS. A path with a lower metric attribute is preferred
over one with a higher value.
The Local Preference attribute is propagated throughout an AS. A higher local preference attribute
is preferred over a lower one for the entire AS.
The Weight attribute is defined locally. If the router learns more than one route to the same
destination, the one from the router with a higher weight is preferred.