Runco CINEWIDETM VX-3000D - Manual (Page 100)

Operation
84 VX-3000d Series Installation/Operation Manual
PRE
L
IMINAR
Y
System Reset: To reset ALL controller settings (including image settings) back to their
factory defaults, choose System Reset from the Service menu.
A confirmation message appears. Select Yes to continue with the reset or select No to
cancel.
This action is not undoable. Proceed with caution! Before you
perform a System Reset, save your “Custom” Memory Presets
(page 72) and ISF Day/Night Memory Presets (page 77).
Caution