Runco CINEWIDETM VX-3000D - Manual (Page 46)

Installation
30 VX-3000d Series Installation/Operation Manual
PRE
L
IMINAR
Y
Figure 3-7 shows the VX-3000d Ultra/CineWide with AutoScope motor assembly.
Figure 3-7. VX-3000d Ultra/CineWide with AutoScope Motor Assembly –
Exploded View
Remove Projector Front Height Adjusters:
Place the projector upside down on a blanket
or other soft surface. Then, remove the two
height adjusters at the front of the projector by
turning them counterclockwise until they come
out.
Standoff, 10mm x
5mm x M5,
Aluminum/Black
Anodize (4x)
4
5
Screw, Phillips
Pan-Head,
10-32 x 3/4” (4x)
1
AutoScope Lens Motor 2
Screw, Phillips Flat-Head,
10-32 x 1/2” (2x)
3
CineWide with AutoScope
Ceiling Mount Adapter/
Projector Stand, Right CineWide with
AutoScope
Ceiling Mount Adapter/
Projector Stand, Left
7
6 Screw, Phillips
Flat-Head,
Undercut,
M6 x 12mm
(4x)