Rose electronic UL-V3 - Manual (Page 42)

Menu Commands
UltraLink User Manual 24
Issue Remote Alt+Tab
Send the Alt and Tab keys to the remote computer as if they were pressed
simultaneously.
Issue Remote Ctrl+Alt+Del
Send the Ctrl, Alt and Delete keys to the remote computer as if they were pressed
simultaneously.
System Keys Remote and System Keys Local
Send system keys to the remote computer or to your computer. See the section, Pass-
through Mode on page 40, for information about system keys.
Exiting Pass-through Shortcuts
See the section, Pass-through Mode on page 40, for information about pass-through
mode. See the section Keyboard and Mouse on page 30 for information about
hotkeys and mouse escape movements .
At least one of the following shortcuts must be active or it would be impossible to
escape
pass-through mode . If you attempt to deactivate all methods, the Viewer
automatically enables keystrokes.
• Hotkey To Exit Pass-through
• Fast Mouse To Exit Pass-through
• Slow Mouse To Exit Pass-through
Settings
The Settings menu contains tabbed dialogs to configure both the UltraLink and the
UltraLink Viewer. Except for basic communications settings, the UltraLink is
configured from the Viewer using the KVM Switch and Security tabs. The Viewer is
configured using the Connections and Keyboard and Mouse tabs. See the
Configuration Settings section for a full description of each tab of the Settings
dialog.