Rose electronic UL-V3 - Manual (Page 45)

Configuration Settings
27 UltraLink User Manual
Configuration Settings
The Settings menu item contains a tabbed dialog to configure the UltraLink and the
UltraLink Viewer. Configure the Viewer with the
Connections and Keyboard and
Mouse tabs. Settings are stored on your computer. If you are an administrator, you
may configure the UltraLink using the KVM Switch and Security tabs. These
settings are stored on the UltraLink.
The following buttons appear at the bottom of the tabbed dialog and remove the
Settings menu from view.
OK
The OK button applies changes made in all tabs to the Viewer immediately. If
an administrator changes items in the KVM Switch or Security tabs, the changes
are saved on the UltraLink and the changes are effective at the next login. KVM
switch settings are active immediately.
The Viewer disables the OK button if another configuration dialog, such as the
User Details dialog of the Security tab is open. Close the dialog to enable the
OK button at the bottom of the Settings tabbed dialog.
Cancel
The Cancel button discard changes you make in all tabs.