Color modes – Rose electronic UL-V3 User Manual

Page 64

Advertising
background image

View Modes

UltraLink User Manual

46

The Viewer automatically enters pass-through mode when going to full-screen view,
unless the Viewer is in quad-screen view.

In the absence of menus and toolbars in full-screen view, the only way to exit full-
screen view is to use hotkeys or mouse escape movements. Exiting pass-through
mode causes the Viewer to exit full-screen view and return to windowed view. If the
UltraLink disconnects while the Viewer is in full-screen mode, the Viewer returns to
windowed view.

Color Modes

Color modes define how the UltraLink transmits video data to the Viewer. These
modes balance color resolution against transmission speed. Color Modes are set on
the

View

menu. The currently active color mode appears as a dot to the left on the

View menu.

The following figure shows typical examples of how each mode looks and the table
gives an approximation of the tradeoffs.

Figure 34 Color affects image quality

These characterizations are approximate; actual results depend on the nature of the
screens. If the images are mostly solid colors, reducing the color quality will have
little effect on the transmission speed. If the images contain gradients or complex
graphics, the speed increase may be dramatic.

Mode

Image Quality

Speed

Color

High

Low

Grey

Medium

Medium

Black and White

Low

High

Table 4 Color mode affects image quality and speed

Advertising