Rose electronic UL-V3 - Manual (Page 57)

Connecting and Logging In
39 UltraLink User Manual
Connecting and Logging In
Connecting
There are two methods of connecting to an UltraLink, the connect menu and the
toolbar. The toolbar button connects to the UltraLink selected in the select list on the
toolbar with a single click.
Figure 27 Choosing an UltraLink to connect
The connection may not complete for one of the following reasons:
• UltraLink is busy with a local user or another Viewer
• UltraLink address is incorrect
• UltraLink is powered off
• Network is not available
• Another login occurs at the same time
In these cases, the Viewer presents the user with an appropriate message.
Figure 28 Cannot find UltraLink
Login
Once connected, the Viewer prompts for a valid user ID and password. If the time to
respond to a login exceeds a limit, the UltraLink displays a message and disconnects.
An UltraLink allows three login attempts before disconnecting. If a valid user ID and
password are not entered in three attempts, the UltraLink terminates the connection
and the Viewer displays a message.