Rose electronic UL-V3 - Manual (Page 58)

Connecting and Logging In
UltraLink User Manual 40
After a successful login:
• The Connect menu changes to Disconnect
• The Connect button on the toolbar is disabled
• The Viewer display area, which previously displayed the message “Not
Connected”, displays video from the remote computer
• The status bar reflect the connection status and the time the Viewer has been
connected to the UltraLink
• The Viewer enters pass-through mode.
Pass-through Mode
After login, the Viewer switches to pass-through mode. Your mouse is restricted to
the display area of the Viewer. Your keyboard and mouse control the remote
computer, but have no effect on your computer. However, by default, pass-through
mode passes all
system keys to your computer.
The status bar displays the current pass-through status. A green indicator on the
lower left turns on in pass-through mode and turns off when pass-through mode is
exited.
Exiting Pass-through Mode
Since the Viewer’s menus and toolbar are unavailable in pass-through mode, a series
of reserved keystrokes and mouse escape movements regain control of your
computer. The escape method is configurable:
• Hotkey shortcut
• Fast mouse escape movement
• Slow mouse escape movement
Figure 29 The green pass-through indicator
When you enter pass-through mode, the escape method appears on the status bar.
This message on the status bar is not permanent, and subsequent messages may erase
it.