Ricoh GX200 - Manual (Page 144)

142
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
1
In shooting mode, press the ADJ. lever.
2
Press the ADJ. lever left or right, or press the #$
buttons until the white balance menu appears.
3
Press the !" buttons to
select [M].
4
Point the camera at a piece of
paper or something white
under the lighting conditions
for your picture.
5
Press the DISP. button.
• The white balance is set.
6
Press the MENU/OK button.
• The symbol appears on the screen.
• The screen is displayed with the white
balance set in Step 5. If the result is
not as expected, repeat the steps to
change the settings as many times as
required.
Note ----------------------------------------------------------------------------------------------
To cancel [Manual Settings], select a setting other than [M] in Step 3.
Setting the White Balance Manually
(Manual Settings)
Manual Settings: Set
Ok Next Item