Ricoh GX200 - Manual (Page 81)

79
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
Assigning the Fn1/Fn2 button to [AF/MF] (GP.195) and then
pressing the Fn1/Fn2 button during shooting allows you to switch
between auto focus (AF) and manual focus (MF). Pressing the Fn1/
Fn2 button switches between auto focus and manual focus
depending on the [Focus] setting on the shooting menu (GP.108),
as shown below.
* The last selected AF mode ([Multi AF] or [Spot AF]) is selected.
1
Set [Set Fn1/2 Button] to [AF/MF] on the setup menu.
• For the operating procedure, see P.195.
2
With the camera ready to
shoot, press the Fn1/Fn2
button.
• When the focus mode changes to
manual focus, the [MF] symbol
appears at the upper right of the
screen.
• When the focus mode changes to
auto focus ([Multi AF] or [Spot AF]),
the [MF] symbol disappears.
Caution------------------------------------------------------------------------------------------
When [Focus] is set to [Snap] or [A] (GP.108), pressing the Fn1/Fn2 button does
not switch AF/MF.
Switching Between Auto Focus and Manual
Focus (AF/MF)
[Focus] setting Press the Fn1 or Fn2 button
Multi AF Switches between [MF] and [Multi AF]
Spot AF Switches between [MF] and [Spot AF]
MF Switches between [Multi AF] or [Spot AF]
*
and [MF]
F2.5 F2.5 30 30
cm cm
10 10
33
11 Hold[OK]: Hold[OK]: