Ricoh GX200 User Manual
Page 192
190
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
n
g
s
5
4
Press the MENU/OK button.
When [WIDE[DW-6]] or [TELE[TC-
1]] is selected:
• When the power is turned on with a
conversion lens attached, or when a
conversion lens is attached, a symbol
indicating the conversion lens type is
displayed momentarily at the center of
the picture display, and then a smaller
symbol is displayed at the lower right
of the picture display.
When [Start Sel.] is selected:
• When the power is turned on with a
conversion lens attached, or when a
conversion lens is attached, the
conversion lens type selection screen
will display. Press the !" buttons to
select the desired setting and then
press the MENU/OK button. A symbol
indicating the conversion lens type is
displayed momentarily at the center of
the picture display, and then a smaller symbol is displayed at the lower
right of the picture display.
Caution------------------------------------------------------------------------------------------
• When [Conversion Lens] is set to [TELE[TC-1]], even if the wide conversion lens (DW-
6) is attached, the camera will recognize the attached lens as the tele conversion lens
(TC-1). In addition, the opposite will be the same.
• When a lens with a different [Conversion Lens] setting is attached, shooting functions
will not operate properly.
Ok
Ok
WIDE[DW-6]
TELE[TC-1]
Conversion
Lens Select
Conversion
Lens Select