Ricoh GX200 - Manual (Page 85)

83
V
a
rio
u
s
S
hoo
ting
Fu
nc
tion
s
1
Assigning the Fn1/Fn2 button to [JPEG>RAW] (GP.195) and
then pressing the Fn1/Fn2 button when a [Pic Quality/Size] setting
other than a RAW setting is selected (GP.105) allows you to
switch to RAW mode with the same image ratio. Pressing the Fn1/
Fn2 button again returns to JPEG mode.
1
Set [Set Fn1/2 Button] to [JPEG>RAW] on the setup
menu.
• For the operating procedure, see P.195.
2
With the camera ready to shoot, press the Fn1/Fn2 button.
• The camera switches to RAW mode
with the same image ratio and [RAW]
is displayed in orange on the screen.
• Pressing the Fn1/Fn2 button again
returns to JPEG mode.
Caution------------------------------------------------------------------------------------------
Pressing the Fn1/Fn2 button does not switch to JPEG mode in the following cases.
• [Pic Quality/Size] is set to RAW mode (GP.105)
• [Continuous Mode] is set to a setting other than [Off] (GP.112)
• [Auto Bracket] is set to a setting other than [Off] (GP.127)
Note ----------------------------------------------------------------------------------------------
• Turning the camera off or changing the [Set Fn1/2 Button] setting after switching to
RAW mode returns the setting to JPEG mode.
• When shooting in RAW mode, see the notes on P.106.
• You can also use the shooting menu to switch between JPEG and RAW mode.
(GP.105)
Switching from JPEG to RAW Mode
(JPEG>RAW)
[Pic Quality/Size] setting Press the Fn1 or Fn2 button
F4000(12M)/N4000(12M)/N3264(8M)/
N2592(5M)/N2048(3M)/N1280(1M)/N640(VGA) Switches between RAW(12M) and the
original [Pic Quality/Size] setting
F3:2(10M)/N3:2(10M) Switches between RAW3:2(10M) and the
original [Pic Quality/Size] setting
F1:1(9M)/N1:1(9M) Switches between RAW1:1(9M) and the
original [Pic Quality/Size] setting
RAW(12M)/RAW3:2(10M)/RAW1:1(9M) Does not operate