Ricoh GX200 - Manual (Page 204)

202
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
n
g
s
5
When [Level Setting] is set to on, the camera uses a level indicator
and sounds to let you know whether the image is level during
shooting. You can select from the following level confirmation
settings. For information on how to use the level function during
shooting, see P.67.
1
Display the setup menu.
• For the operating procedure, see P.184.
• You can also press and hold the DISP. button in shooting mode to
display the setting menu. If you pressed and held the DISP. button,
skip to Step 3.
2
Press the " button to select [Level Setting] and press
the $ button.
3
Press the !" buttons to select
the desired setting.
4
Press the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
• For information on how to use the level function during shooting, see P.67.
• The level function is not available when recording movies or during interval shooting.
• The level sound is not emitted, even when [Level Setting] is set to [Disp + Snd] or
[Sound] and [Vol. Settings] is set to [ ] (Mute).
Changing the Level Confirmation
Setting (Level Setting)
Available Settings Description
Off
*Default setting The level indicator will not display. The level sound will not emit.
Display The level indicator will display. The level sound will not emit.
Disp + Snd The level indicator appears on the screen and a level sound is
emitted when the camera is level.
Sound The level indicator will not display. A level sound is emitted when
the camera is level.