Ricoh GX200 - Manual (Page 154)

152
S
hoot
ing/
P
laying
Back M
o
vi
es
2
Note ----------------------------------------------------------------------------------------------
• The flash cannot be used.
• While shooting movies, only digital zoom can be used. (GP.45)
• When the shutter release button is pressed in Step 5, the camera focuses on the
subject.
• The remaining recording time may not change uniformly because it is recalculated
from the remaining memory capacity during movie recording.
• Use the shooting menu to set the image size and frame rate of movies.
• The shooting menu items for movie mode differ from those in still image mode.
(GP.102)
• Depending on the remaining battery level, the battery may become depleted during
movie shooting. Use of a battery with adequate remaining power or the AC adapter
(sold separately) is recommended.
• Use of a high speed SD memory card with sufficient memory is recommended when
shooting for long periods.
You can select the number of shot frames per second (frame rate)
in movie mode.
1
In scene mode, select 3 [Movie].
2
Press the MENU/OK button.
• The scene mode selection screen appears.
3
Press the ! button.
4
Press the $ button.
• The shooting menu is displayed.
5
Press the " button to select [Frame Rate] and press the
$ button.
6
Press the !" buttons to select
[30Frame/S] or [15Frame/S].
7
Press the MENU/OK button.
• The setting appears on the screen.
Setting the Frame Rate (Frame Rate)