Ricoh GX200 - Manual (Page 217)

215
C
h
a
n
gi
ng C
a
m
e
ra
Se
tti
n
g
s
5
You can shoot still images with the time or date stamped onto the
picture.
The date/time setting on the setup menu is explained here.
1
Display the setup menu.
• For the operating procedure, see P.184.
2
Press the " button to select
[Date Settings] and press the
$ button.
3
Press the !"#$ buttons to
set the year, month, date and
time.
• You can press and hold the !"
buttons to quickly raise or lower the
setting.
• Press the #$ buttons to move to the
next item.
4
In [Format], choose the date
and time format.
5
Check the information on the
screen and then press the
MENU/OK button.
• Once you have set the date and time,
the display returns to the setup menu.
6
Press the MENU/OK button.
Note ----------------------------------------------------------------------------------------------
• If the battery is removed for more than one week, the date and time settings will be
lost. These settings must be made again.
• To retain the date and time settings, load a battery with adequate remaining power for
more than two hours.
Setting the Date and Time
(Date Settings)