Radio Shack PRO-2052 - Manual (Page 13)

13
SCAN In conventional scanning, scans through stored chan-
nels; in trunking mode, scans through the scan lists
and turns on/off the S-bit feature.
MANUAL Stops scanning and lets you directly enter a channel
number or frequency.
TRUNK Selects trunk scanning or conventional mode.
SVC (service) Selects a service bank; turns on/off the disconnect
tone detect feature.
PRIORITY/SPEED Sets and turns on and off the priority feature; turns the
HyperSearch mode on and off; in Trunking mode, pro-
grams the priority ID.
Number Keys Each key has single-digit (0 to 9) and double-digit (11
to 20) labels. Use single digits to enter a channel, fre-
quency, ID number, or bank numbers 1 to 10. Use
double-digits to enter bank numbers 11 to 20.
CLEAR
/ •
Clears an entry; enters a decimal point; in trunk scan-
ning mode, sets the range between fleet and sub-fleet
for Motorola Type 1 IDs and sets the range between
agency and fleet for Ericsson EDACS IDs.
E (enter) Enters frequencies into channels; enters IDs into scan
lists.
LIMIT/ ▼ Sets the frequency range; sets the search direction
and holds a frequency search.
DELAY Programs a 2-second delay for the selected channel,
a limit search, or each service scan. Also programs a
5-second delay in trunk scanning mode.
SEARCH Searches a specified frequency range to find frequen-
cies; searches for active IDs in the trunk scanning
mode.
L/O/SKIP (lock out/skip) Lets you lock out selected channels or frequencies;
lets you lock out a selected ID in the trunk scanning
mode.
20-432.fm Page 13 Friday, July 14, 2000 11:30 AM