Radio Shack PRO-2052 - Manual (Page 39)

39
Automatically Storing an ID in
a Scan List Location
To store an ID in the first available
scan list location during a search,
press
E at any time after the scanner
stops on that ID.
Or, follow these steps to store an ID in
a specific scan list location.
1. Press PRIORITY when the desired
ID appears.
2. Repeatedly press ▲ or ▼ to
choose a specific scan list loca-
tion.
3. Press E .
Note: An ID you enter into a scan list
location automatically overwrites any
ID that is already stored in that loca-
tion.
To display a scan list location and
store an ID in that location during a
search, press
PRIORITY to display the
current scan list location, then press E
when your scanner stops on an ID you
want to store.
Deleting a Stored ID
1. Press MANUAL .
2. Repeatedly press ▲ or ▼ to select
the scan list location (shown at the
top of the display) you want to
delete.
3. Press 0 then E .
SCANNING THE SCAN
LISTS
Press SCAN to begin scanning the
lists you have programmed. Id
SCAN scrolls on the display.
Note: If more than one of the scan IDs
you have stored do not work,
Error
flashes twice and the scanner beeps
several times, then the scan list num-
bers appear at the top of the display.
To remove a scan list from active
scanning, use the number keys to en-
ter the scan list’s number. The scan
list indicator turns off, and the IDs in
that list are not scanned.
Note: You cannot remove all the scan
lists. One scan list must always be ac-
tive.
To restore a scan list to active scan-
ning, use the number keys to enter its
number again.
Press SEARCH to return to the previ-
ously selected function.
Priority ID Scanning
As in conventional scanning, you can
designate one ID in each scan list as a
priority ID.
To select an ID as a priority ID, hold
down
PRIORITY for about 2 seconds
when the scanner stops on the ID. P
appears.
20-432.fm Page 39 Friday, July 14, 2000 11:30 AM