Radio Shack PRO-2052 - Manual (Page 48)

48
PC TO SCANNER FUNCTIONS LIST
For the following functions, type the command then press Enter on your computer’s
keyboard.
Function Command
Check frequency stored in a channel # PM###
where ### equals the three-
digit channel number
Check if Delay is on DL
Clear the scanner’s memory AC
Important: This procedure
clears all the information
you have programmed into
the scanner. Use this proce-
dure only when you are
sure your scanner is not
working properly.
Check if Data Skip is on DS
Check if Lockout is on LO
Check the lower limit frequency for a limit
search LL
Set the lower limit frequency for a limit search LL########
where ######## equals the
frequency
Check the upper limit frequency for a limit
search LU
Set the upper limit frequency for a limit search LU########
where ######## equals the
frequency
Check the status of the current channel MA
Go to a specific channel MA###
where ### equals the three-
digit channel number
Check the scanner’s mode MD
20-432.fm Page 48 Friday, July 14, 2000 11:30 AM