Radio Shack PRO-2052 - Manual (Page 15)

15
WX Indicates (along with the activity indicator) that the
scanner is searching the weather service bank.
TRUNK Appears when the scanner is in trunk scanning
mode. 1–20 appears as the bank number or list
number.
Shows which service bank is currently active. Shows
(activity indicator) which control/voice channels are currently ac-
tive.
SFT Appears when the scanner is in the shift mode;
flashes when the remote function is on.
M Appears when the trunking system type is Motor-
ola.
E Appears when the trunking system type is
EDACS.
ALERT Appears when the weather alert is on; flashes
when the scanner receives an ALERT signal or
SAME alert.
Appears when a priority channel is selected or the
priority ID is set.
SCAN Appears when the scanner scans channels.
MANUAL Appears when you set the scanner to its manual
mode.
PRI Appears when the priority feature is turned on.
HOLD Appears when the scanner is holding during a
search.
DELAY Appears when the delay feature is turned on.
DATA Appears when the data skip function is active; ap-
pears in the trunk scanning mode when the dis-
connect tone detect function is off.
P
20-432.fm Page 15 Friday, July 14, 2000 11:30 AM