Radio Shack PRO-2052 - Manual (Page 47)

47
TURNING THE REMOTE
FUNCTION ON AND OFF
To turn the remote function on or off,
hold down
REMOTE until the scanner
beeps. SFT flashes when the remote
function is turned on.
PC TO SCANNER
COMMANDS
Follow these steps to enter com-
mands to operate the scanner using
your computer.
1. Make sure your computer and
scanner are connected (see “Con-
necting the Scanner to a Com-
puter” on Page 46).
2. Run your computer’s communica-
tion software (see “Setting the
Remote Communication Format”
on Page 46).
3. Type a command listed in the fol-
lowing table then press Enter on
your computer’s keyboard.
For this operation
Type this
command
Scan KEY00
Manual KEY01
Select channel 0–9 KEY02 #
where #
equals the
numeric
number
. (decimal point)/Clear KEY03
E (Enter) KEY04
Priority/scan speed KEY05
L/O/Skip KEY06
Hold/ ▲ (up)/Remote KEY07
Limit/ ▼ (down) KEY08
Search KEY09
SVC KEY10
Data/Alert KEY11
Delay KEY12
Trunk KEY13
Shift KEY14
20-432.fm Page 47 Friday, July 14, 2000 11:30 AM