Radio Shack PRO-2052 - Manual (Page 20)

20
Press SEARCH to start searching im-
mediately or to continue searching if
you want to skip a frequency.
During service-search, you can press
HOLD to pause the searching. HOLD
appears. Press ▲ or ▼ to move up or
down one step, or press SEARCH to
resume searching.
Follow these steps to store service
bank frequencies into channels.
1. Press MANUAL .
2. Use the number keys to enter the
channel number (1–1000) where
you want to store the frequency,
then press
MANUAL .
3. Press SVC then SEARCH to select
a service bank and begin search-
ing.
4. When the scanner stops on a
transmission, press HOLD . The
frequency appears.
5. Press E to store the frequency into
the channel.
LIMIT SEARCH
If you do not know a frequency to
store, you can search for transmis-
sions within a range of frequencies
you select, called the
limit search
range. Then you can store any inter-
esting frequencies you find into chan-
nels.
1. Press MANUAL , enter the chan-
nel number where you want to
store a frequency, then press
MANUAL again. The channel num-
ber appears.
2. Use the number keys and
•
to
enter the frequency that is the
lower limit of the range you want
to search.
3. Press LIMIT.
4. Use the number keys and
•
to
enter the frequency that is the
upper limit of the range you want
to search.
5. Press LIMIT then SEARCH . The
scanner begins to search from the
lower limit to the upper limit.
6. When the scanner stops on a
transmission, quickly press either:
• E to store the displayed fre-
quency into the channel. The
scanner stores the frequency.
• ▲ or ▼ to stop searching so
you can listen to the transmis-
sion.
HOLD appears.
To release hold and continue
searching, press
SEARCH .
Notes:
• To step through the frequencies
while HOLD appears, press ▲ or
▼ .
• Press ▲ then SEARCH to search
from lowest to highest frequency,
or press
▼ then SEARCH to
search from highest to lowest fre-
quency.
20-432.fm Page 20 Friday, July 14, 2000 11:30 AM