Radio Shack PRO-2052 - Manual (Page 49)

49
Function Command
Check a bank’s priority channel number
Note: Enter a letter instead of the bank num-
ber. Example: “C” for bank 3. PC n
Set a bank’s priority channel PC n###
where ### equals the three-
digit channel number
Check if Priority is on PR
Turn Priority on/off PRN/PRF
Add a frequency to a channel PM### ########
where ### equals the three-
digit channel number and
######## equals the fre-
quency
Check if Squelch Monitor is on QU
Turn Squelch Monitor on/off QUN/QUF
Check if Priority Monitor is on RI
Turn Priority Monitor on/off RIN/RIF
Check scanner modulation setting RM
Check which banks are active SB
Select banks for scanning SB x
where x equals a matching let-
ter equivalent to the bank you
want to scan. For example, to
scan bank 5, type E. Or, to
scan banks 3 and 7, type CG.
Check if Squelch is open SQ
Check for a frequency in search skip memory SS##
where ## equals the two-digit
memory number
Enter a frequency in search skip memory SS########
where ######## equals the
frequency
20-432.fm Page 49 Friday, July 14, 2000 11:30 AM