Output Solutions C I - 8 0 6 0 - Manual (Page 115)

8-1
8. Technical Data
The standard printer with IBM Proprinter and Epson LQ-2550 emulation is equip-
ped with the PM SER/PAR (Personality Module). It contains a parallel
(Centronics®-compatible) and a serial V.24 (RS-232 C) interface.
The following technical data refer to the standard Personality Module PM SER/
PAR.
8.1 Printer Specification
Print head technology
Serial Impact Dot Matrix (SIDM) technology.
Print direction
Bidirectional with logic seeking.
Print head
24 needles, needle diameter 0.25 mm (0.01 inch)
Print matrix
S
24 x 36 for letter quality (LQ)
S 12 x 36 for near letter quality (NLQ)
S 12 x 12 for draft (DRAFT)
S 12 x 10 for high speed draft (HS)
Print format
up to165 characters at 10 cpi
Ribbon
Black nylon ribbon for 30 million characters, auto ribbon run control.
Dimensions
S
Width = 734 mm
S Depth = 280 mm
S Height= 295 mm