Operation-related problems – Output Solutions C I - 8 0 6 0 User Manual
Page 92
Troubleshooting and Diagnostics
6-8
6.4
Operation-related Problems
S
Paper is not positioned at perforation for tear-off
S
Select the correct form length using the Set-up feature.
S
Reset top of form by moving the paper into park position.
S
Paper tears or jams
S
Examine the paper path; remove any obstacles
S
Is the paper too loose or too tight between the tractors?
S
If the transport holes are deformed at their outer edges, the paper is too
taut.
S
If the paper rises between the tractors it is too loose.
S
Readjust the tractor spacing so that the paper lies smoothly but without
any tension.
S
Ensure that the paper is horizontally aligned on the pins.
S
Paper moves out of one tractor.
S
Parking paper and resetting top of form
S
Tear off the paper at the perforation.
S
Press .
S
Press until the paper is in the park position.
S
Press . Printing will resume at the top of the next form.
S
Print head carriage does not move smoothly / does not move at all
S
Examine the paper path. Remove any obstacles.
S
Examine the carriage area for obstacles. Remove where necessary.
Press the key when the paper path is cleared.
S
Make sure that the transport lock has been removed.
S
Single sheets are skewed
S
Adjust ASF cassette paper guides.
S