Output Solutions C I - 8 0 6 0 - Manual (Page 26)

Getting Started
1-10
1.8 Paper Loading
There are three possibilities for paper feeding:
S
Fanfold paper with the two tractor cassettes;
S Single sheets through the manual paper path;
S With the automatic sheet feeder cassettes (ASF-Cassettes, optional). For
further information please refer to chapter 7.2 ASF Cassettes.
1.8.1 Paper Source Selection
The basic selections for PAPER SOURCE are:
S TRACTOR (Default TRACTOR LOWER, indicated by
’)
S MANUAL
Select 'TRACTOR L/U' as paper source on the operator panel
The following diagram shows which keys to press and what is displayed on the
operator panel.
Power the printer ON:
KEY DISPLAY
[OFFLINE] LOCAL 1 ELQ
[MENU] TEST MODES º
[DOWN] DEFINE MACRO º
[RIGHT] » SELECT MACRO º
[DOWN] » PAPER SOURCE º
[RIGHT] » TRACTOR LOWER r
[DOWN] » TRACTOR L/U
[ENTER] » TRACTOR L/U r
[ONLINE] READY 1 ELQ
Note: The settings selected and confirmed are only active until the printer is
switched off. In order to prevent losing your new settings you can save
them using the function SAVE MENU (see chapter 2.4.3 How to Save
Settings.