Output Solutions C I - 8 0 6 0 - Manual (Page 70)

Description of the Individual Menu Items
4-6
S Pitch
Defines the number of characters printed per inch (10, 12, 15, 17, 18, 20 or
proportional).
Any pitch setting can be combined with any available font. In some cases
this might lead to a conflict with font designs. The pitch setting is, therefore, a
matter of personal taste.
S LINE
Determines the number of lines per inch (line space).
S EMULATION
The emulation determines the set of commands available for the printer (see
Appendix D and E). You can activate the following emulations:
S EPSON LQ / ESC/P2
S IBM PROPR.
S IBM PROPR. AGM
The selected emulation is also part of the actual macro. With a change of the
macro (e.g. key is pressed) it may happen that the emulation will also
be changed.
Be careful: Do not change the emulation within an application.
.
S
CHARACTER SET
When selecting a character set it can be further specified by the correspon-
ding national versions.
Detailed print samples are found in Appendix B and the Character Set
Tables in Appendix C.
If a different macro is selected the default character set may change as well.
e.g. S IBM PROPR. emulation has the character set IBM SET 2 as
default.
S EPSON / EDC/P2 emulation has the character set EPSON
EXT.GCT as default.